Title: Temperature dependence of tack for polyacrylic block copolymer/tackifier blend
Page Range: p.121-128
Author(s): Kohei Shitajima; Nozomi Karyu; Kyohei Takada; Syuji Fujii; Yoshinobu Nakamura; Yoshiaki Urahama
File size:
Download the pdf (subscribers only)
Buy the pdf (non-subscribers)
Journal: Polymers and Polymer Composites
Issue Year: ppc
Volume: 23
Issue No: No.3
Abstract
The effect of polymer and tackifier compatibility on tack of pressure-sensitive adhesive (PSA) tape was investigated. Poly(methyl methacrylate)-block-poly(butyl acrylate)-block-poly(methyl methacrylate) triblock copolymer was used as the base polymer and three types of tackifiers, an aliphatic petroleum resin (A), a special rosin ester resin (B), and a rosin phenolic resin (C), were mixed at 10-30 wt.%. Compatibility with the base polymer was greater in the order of C > B > A. Tackifier agglomerates of approximately 10 nm were observed by transmission electron microscopy for the PSA with tackifier C. Similar agglomerates were observed for tackifier B, but the size increased with content. The size for tackifier A was several tens of micrometres. Dynamic mechanical analysis indicated that the glass transition temperature of the poly(butyl acrylate) phase increased upon addition of tackifiers B and C. This trend was more significant for tackifier C. It was not observed for tackifier A. The temperature dependence of tack was measured using a probe tack test. Tack was greater in the order of C = B > A. Tack at higher temperatures was superior for greater tackifier C contents. Tackifier and base polymer compatibility has a strong effect on tack and its temperature dependence. 20 Refs.
Related reading
More journal reading and science coverage connected to this topic.
Shear strength of concrete wide beams shear reinforced with GFRP plates
Title: Shear strength of concrete wide beams shear reinforced with GFRP plates Page Range: p.111-118 Author(s): Min Sook Kim; Joowon Kang; Young Hak Lee…
Residual strength and deformation recovery of RC beams strengthened with FRPs plates under the sustained load
Title: Residual strength and deformation recovery of RC beams strengthened with FRPs plates under the sustained load Page Range: p.119-126 Author(s): Dooyong Cho; Hoseong…
Reliability design and optimization process on through mold via using ultrafast laser
Title: Reliability design and optimization process on through mold via using ultrafast laser Page Range: p.1-8 Author(s): Hsiang-Chen Hsu; Shih-Jeh Wu; Wen-Fei Lin; Boen…