Title: Detection of Voids in Carbon/Epoxy Laminates and Their Influence on Mechanical Properties
Page Range: p.371-380
Author(s): Di Landro L; Montalto A; Bettini P; Guerra S; Montagnoli F; Rigamonti M
File size:
Download the pdf (subscribers only)
Buy the pdf (non-subscribers)
Journal: Polymers and Polymer Composites
Issue Year: ppc
Volume: 25
Issue No: No.5
Abstract
Defects, such as voids and delaminations, may significantly reduce the mechanical performance of components made of composite laminates. Distributed voids and porosity are generated during composite processing and are influenced by prepreg characteristics as well as by curing cycle parameters. On the basis of rheological and thermal analyses, as well as observations of laminates produced by different processing conditions, curing pressure appears the most influent factor affecting the void content. This work compares different methods for void analysis and quantitative evaluation (ultrasonic scan, micro-computed tomography, acid digestion, SEM image analysis) evidencing their applicative limitations. Carbon/epoxy laminates were produced in autoclave or oven by vacuum bag technique, using different processing conditions, so that void contents ranging from 0% to 7% volume were obtained. Effects of porosity over laminates mechanical performances are analysed. The results of tensile and compressive tests are discussed, considering the effect that different curing cycles have over void content as well as over fibre/resin fraction. Interlaminar strength, as measured by short beam shear tests, which is a matrix-dominated property, exhibits a reduction of failure strength up to 25% in laminates with the highest void content, compared to laminates with no porosity. 24 Refs.
Related reading
More journal reading and science coverage connected to this topic.
Combined temperature and moisture effect on the monotonic and fatigue strengths of sandwich beams with glass-polypropylene faces and aluminum foam cores
Title: Combined temperature and moisture effect on the monotonic and fatigue strengths of sandwich beams with glass-polypropylene faces and aluminum foam cores Page Range:…
Nonlinear dynamic characteristics of PZT/polymer gripper
Title: Nonlinear dynamic characteristics of PZT/polymer gripper Page Range: p.79-84 Author(s): Jia Xu; Yi-Ran Li; Hai-Bo Wang; Zhi-Wen Zhu File size: Download the pdf…
Enhancement mechanism for carbohydrate polymer green lubricant
Title: Enhancement mechanism for carbohydrate polymer green lubricant Page Range: p.85-90 Author(s): Shih-Chen Shi; Jhen-Yu Wu File size: Download the pdf (subscribers only) Buy…